Bytecc usb to ide how to#
Bytecc usb to ide install#
Bytecc usb to ide driver#

At least you canвЂ™t plug this connector in upside down. In the picture above, if you look at the pins on the drive and the holes in the connector, youвЂ™ll see what IвЂ™m talking about. Instead of having a plastic ridge to mate with the channel in the IDE connector on the drive, the smaller connector has one pin opening closed. The smaller connector on this cable isnвЂ™t keyed in the same way that the 3.5 inch connector is. This isnвЂ™t the Sony drive, this is the drive out of BillвЂ™s notebook computer that also died that same weekвЂ¦ do we see a pattern here? Bill does have a tendency to whine thoughвЂ¦ Anyway, he did bring over the defective Sony HDPS-M1, which we ended up destroying in the process of removing the drive. Julie: IвЂ™m watching reruns of Xena Warrior Princess.ДЄctually only the first 2 sentences of that conversation really happened. Д«ill: But youвЂ™re The Gadgeteer! You can do anything!Д«ill: Do you have SOMETHING to copy the files from this 2.5 inch drive?! Д«ill: I was hoping that you had a way to copy the files off. The conversation went something like this:Д«ill: My Sony card reader died while I was shooting a baseball game today!Д«ill: I need to get the pictures off so I can post them on my site. I tried transferring several large files back and forth from drive to computer and visa versa, I had no real issues with speed.ДЄfter testing the 3.5 inch side of the cable, I didnвЂ™t think IвЂ™d have the opportunity to test the 2.5 inch connector on this product, but one Saturday afternoon I received a frantic phone call from my friend Bill of. I havenвЂ™t included any file transfer speed info in this review, because the results of such tests are dependent on the speed of the drive, speed of your computer, etc. From there you can treat it like any other drive by dragging and dropping files.

Bytecc usb to ide driver#

I tried it with my G5 iMac without installing this driver and it worked just fine.ДЄfter you plug the USB connector into your computer, the drive should show up automatically either under My Computer on your PC, or as a newly mounted drive on your Mac desktop.

Bytecc usb to ide install#

Another area where the user manual is wrong is where it tells you to install a driver if you want to use this product with a Mac. This product is compatible with PCs and Macs. The correct way to connect the drive to your computer is to plug in the IDE cable to the drive, plug in the power to the drive and then plug the USB connector into the computer. Here you see the connector plugged into one of the drives, and the included power adapter plugged into the power port on the same drive. I donвЂ™t think it really matters if the drive is set to Master or Slave, it worked fine for me either way. The drive on top doesnвЂ™t have any information for setting the jumpers.

Bytecc usb to ide how to#

The drive on the bottom in the picture above has a sticker that shows how to arrange the jumpers for Master or Slave mode. YouвЂ™ll also notice that there are little plastic jumpers to the right side of the IDE connector, and then to the right of the jumpers there is the power connector.ДЄccording to the very terse one page user manual (sheet) included with this cable, you are supposed to make sure the drive is in Master mode. So, just make sure you pay attention to what youвЂ™re doing. At least this was something that I was able to do with the 2 drives I tested it with. Unfortunately, even with the вЂkeyвЂ™, you can still plug the connector in upside down. This notch is supposed to keep you from plugging in the IDE cable incorrectly, as the connector has a matching вЂkeyвЂ™ to the notch. There is a notch in the middle of plastic surrounding the pins. If you look closely at the picture above, you can see that the IDE connectors on the drives are keyed.

I hadnвЂ™t booted up the computer in ages and didnвЂ™t even recall if I had copied all the files off the two 3.5 inch drives before retiring the computer.

My first test of this product, was to I pull the drive cage out of an old 800MHz Athlon desktop that I had laying around. Supports 3.5, 2.5 Hard Disks, CD-ROM(max. ThatвЂ™s really the only difference with this newer version and the older version. One side is for 3.5 inch drives and the other is for 2.5 inch (notebook) drives. This new version has a double sided connector.

The first version only allowed for connections to devices using a full-sized IDE connector. Version 2 has the same features as the original version, but adds one important feature to the mix. For those of you that might recall the first review, this is a cable that allows you to connect an IDE device to your computer via a USB port.